Version 2.63
Version 2.60
Version 2.50
Version 2.49
Version 2.40
Version 2.36
Version 2.33
Version 2.30
Version 2.23
Version 2.20
Version 2.10
Version 1.02
Version 1.01 (First production)
This release note applies to the following models:
Version 1.01 or later | |||
WV-U65302-Z2 | WV-U65302-Z2G | ||
Version 2.10 or later | |||
WV-S65302-Z2 | WV-S65302-Z2G | ||
Version 2.20 or later | |||
WV-S65302-Z2-1 | |||
: Recommended to apply |
Release date: July 26, 2024
Resolved Issues
Corrected an issue where the image might gradually get out of focus in version 2.60.
Occurrence conditions:
After auto focus/preset sequence while the frame rate is limited to 15fps(12.5fps*) under the following setting.Extension software is working
[Super Dynamic] level is set to 30 or higher
[Privacy Mask] is enabled
[Stabilizer] is enabled
[Maximum shutter] is set to 2/30s(2/25s*) or longer
*When 25fps is selected for [Image capture mode].
Release date: May 31 2024
New Features / Improvements
Changed the font and color on the browser as below:
The font of on-screen display (OSD) to Iwata UD
The font of the live and setting windows to NotoSans
The color of i-PPO logo on the live window to black
Removed the need for KMS registration of AI Face Detection. View detail
From this version, issuing and registering the Registration Key are no longer required for AI Face Detection.Added improvements for 3rd party application development.
See details at Development Partner Portal.Improved [Control log] to record "AI processor occupancy (Ext. software)" logs properly.
Added [Auto position refresh] on/off setting. View detail
By selecting "On", the position is automatically refreshed when it's misaligned.Improved ONVIF communication.
Resolved Issues
Fixed the following issues including other minor issues:
Corrected an issue where the setting menu and schedule of pre-installed extension software might not appear with version 2.50.
Corrected the SNMP MIB response of the following models.
Applies to: WV-U65302-Z2 onlyCorrected an issue where some 3rd party applications might not work with version 2.50.
Corrected an issue where AI-VMD detection frames did not appear on Genetec Security Desk with version 2.50.
Corrected an issue where SMTP setting might be initialized after the camera was rebooted.
Corrected the response to the following CGI command.
cgi-bin/get_io2?mode=monitor
Added a correction to a message in French.
Release date: Feb. 29 2024
[Update on Apr. 24] To use Vaxtor VaxALPR with this firmware version, update VaxALPR to V1.3.21 or later.
New Features / Improvements
Added improvements to enhance security.
e.g.,
- Supports signed firmware
- [Subject Alternative Name] field has been added to [CA Certificate - Generate Certificate Signing Request] in HTTPS setting. View detail
- [Security] tab has been added to the [User mng.] setting. View detailAdded improvements to the live and setting windows on the web browser.
e.g.,
- A button to show and hide frame rate and bit rate has been added on the live image. View detail
- HTTP alarm notification setting has been improved. View detailImproved the response to CGI commands.
Refer to Command Document (H.265 supported models) at Device integration - IP Camera / i-PRO page.Improved the image quality.
For verification results and restrictions on each browser, refer to "Verification of camera performance with Google Chrome, Firefox, and Microsoft Edge (C0132)" on Technical Information.Improved the connectivity to Video Management Software (VMS).
Improved the settings for the extension software AI Privacy Guard. View detail
*Applies only to WV-S series models.Added improvements for stable PTZ movement.
Improved the ONVIF connection.
Resolved Issues
Release date: Feb. 29 2024
Release date: Sept 28, 2023
->Updated on Oct 31: Added an item written in red
New Features / Improvements
Improved the performance while updating or installing extension software to avoid failure in a slow network.
Enabled all preset positions in Preset sequence 1, 2 and 3 by default.
Changed the [Auto track data in video stream] default setting from "Off" to "On (with live display)" on the [Auto track] tab in [PTZ].
Improved the image quality.
Improved the Auto Focus performance in low illuminance environments.
Improved the PTZ performance.
Improved the response to the following CGI commands.
/cgi-bin/getdata
/cgi-bin/get_capability
/cgi-bin/set_sdcard?sdcard=1
See AlsoWV-S65302-Z2 | i-PRO Products
Improved the ONVIF connection.
Improved the auto tracking behavior.
Improved the data management when updating extension software applications.
Improved the SRTP communication.
Changed the [SNMP] default setting to Off on the [Network] page.
Improved the performance while downloading a video data from an SD memory card in an unstable network.
Resolved Issues
Corrected an issue where the camera showed a blank pop-up of installation status error.
Corrected an issue where the image could not be zoomed out on video management system.
Occurrence condition: After maximum zoom by mouse drag.Corrected an issue where the camera rebooted.
Occurrence conditions:
- [Image capture mode] is "4:3โmode(30fps mode)" or "4:3โmode(25fpsโmode)"
- Digital zoom to the maximum levelCorrected an issue where an mp4 video recorded on an SD memory card could not be played back on the camera.
Occurrence condition: Record an mp4 video with [GOP control] set to "Advanced(FixedโGOPโ60sโw/1sโkey-frame)"Corrected an issue where a communication error might occur on the connected i-PRO recorder on rare occasion.
Occurrence condition: Start sequence display on the recorder while performing SD memory card recording on the camera.Corrected an issue where the [Save trigger] setting of SD memory recording might unexpectedly changed after firmware update.
Corrected an issue where the camera showed low image quality.
Occurrence conditions:
- [Stabilizer] is On in the [Basic] setting
- [Frame rate] is set to 8.3fps, 4.2fps or 3.1fpsCorrected an issue where the port of [Destination of Trap] was always the default value (162) in the actual operation, even when any other port number is set on the SNMP trap setting.
Corrected an issue where MQTT notification worked only when [AI analytics target] is set to "Other" for audio detection.
Corrected an issue where [Auto track] and [Auto track alarm setting] were disabled when [Maximum shutter] is set to "Max.2/30s" or longer value.
Corrected an issue where the window to set preset positions did not appear when setting VIQS.
Corrected an issue where multi-screen live view might not show images from other cameras.
Release date: May 31 2023
Resolved Issues
Corrected an issue where a short-term communication error could occur on a connected recorder.
Occurrence condition:
- FIrmware version from 2.10 to 2.33
- [SD backup rec.] is enabled on the recorder connected to the camera.
Release date: March 31, 2023
New Features / Improvements
Supports ext4 for SD memory card format.
View details
[SD Memory Card File System Format] setting has been added to the [SD memory card] page.Improved the ONVIF connection.
Resolved Issues
Corrected an issue where the camera might reboot.
Occurrence conditions:
- The extension software AI-VMD and AI Privacy Guard are installed and enabled on the camera.
- The camera is connected to a recorder and โSD backup rec.โ is enabled on the recorderโs setting.Corrected an issue where the camera might be slow to start up.
Occurrence condition: Multicast auto start is enabled by CGI command.
Release date: February 28, 2023
New Features / Improvements
Supports new CGI commands.
Supports day and night scene switching on the [Schedule] setting. View details #1
"<Auto-Schedule>Daytime: Image Quality 1/ Night: Image Quality 2" has been added to the [Schedule mode] options.
*[Scene settings linked to sunrise and sunset times] need to be configured to use this function.Added the On/Off setting to the [SNMP agent setting] in [Network]->[Advanced]->[SNMP].
*Default=OnSupports a CGI command to start SD recording when an image transmission stops. View details #2
Supports editing the camera title on the live window. An edit icon appears next to the camera title.
Note: Available for administrator only.Supports a command to send HTTP port number to a 3rd party application.
Changed the default DHCP host name from COM MID1 to i-PRO-<MAC address of camera>.
Improved the FTP/SFTP settings as follows View details #3
- Added 2fps and 3fps to the [Transmission interval] options of [Pre alarm] and [Post alarm]
- Increased the number of SFTP server setting from 1 to2
- Added "1920x1080" to the [Image capture size] options of [Pre alarm]Added 0.5s, 1s, 2s, 3s, and 4s to the [Alarm deactivation time] options. View details #4
Supports replacing %25 with % in the destination address of HTTP alarm notification.
Added "video_server.image.mode" parameters to the CGI command "/cgi-bin/set_imgmode".
Improved the connectivity with i-PRO Configuration Tool (iCT).
Improved [Audio detection] setting so that [AI analytics target] options (Gunshot/ Yell/ Vehicle Horn/ Glass Break) are enabled by default, when [Audio detection] is set to "On".
Changed the text color on the log list for the visibility improvement.
Improved the frame rate during the slow shutter operation under low illuminance condition.
Improved the image quality as follows
Image contrast / Auto focus performance during pan-tilt operation / Image brightness during stabilizer operationImproved the ONVIF connection.
Improved the detection accuracy of people detection for extension software.
Supports the extension software AI Scene Change Detection free of charge.
Improved the auto tracking performance.
Resolved Issues
Corrected an issue where the mic input volume from the camera became higher than the selected value.
Occurrence condition: Change the [Mic input volume] on the live window.Corrected an issue where it was not possible to reinstall an extension software application after uninstalling it.
Occurrence condition: The power of camera is turned off while uninstalling the extension software application.Corrected an issue where the camera could not connect to a recorder and VMS on rare occasion.
Occurrence condition: TLS1.3 is selected for [HTTPS-Connection].Corrected an issue where H.265/H.264 live image might not appear.
Occurrence condition: Network Address Port Translation (NAPT) is configured on the routerCorrected an issue where the image could appear distorted on rare occasion.
Release date: December 16, 2022
New Features / Improvements
Improved the focus performance after the lens moves to the preset position, in a scene with point light sources.
Resolved Issues
SFTP transmission fails depending on the SFTP server to be connected.
The live image may not appear, as the maximum number of users concurrently accessible to the camera decreases.
Occurrence condition:
When satisfying all of the following conditions:
- Version 2.10 or 2.20
- [Internet mode] is set to Off by CGI command
- H.264/H.265 transmission
Release date: September 30, 2022
Add new models
First mass production for WV-S65302-Z2-1
New Features / Improvements
Changed the company name in the GlobalSign digital certificate installed on the camera to "i-PRO Co., Ltd."
Supports the FTP function. View details
Supports the extension software for 3rd party application.
Added the HTML initialization function. (Added on Nov.11, 2022)
[Load the default HTML files (setup menu).] and [Reset to the default and load the default HTML files.] have been added to the [Default reset] tab.
Resolved Issues
The occupancy detection area information is not included in the HTTP alarm notification from the camera.
The frame rate and bit rate may not recover once they drop due to the environmental cause.
Release date: December 16, 2022
Applies only to: WV-S65302-Z2 and WV-S65302-Z2G
Add new models
First mass production for WV-S65302-Z2 and WV-S65302-Z2G
Release date: September 15, 2022
New Features / Improvements
Release date: September 15, 2022
First mass-production
